Worldwide shipment - 14 days to return - 2 year warranty - Shipped within 2 business days - High quality materials
Mercedes E-Class W211 EvoX-R replacement

Mercedes E-Class W211 EvoX-R replacement

The W211 E-Class headlight is made by Hella and uses the E55 projectors. These projectors are known to burn. It can be replaced directly by the EvoX-R projector.


Mercedes W211 Bi-Xenon projector Mercedes W211 EvoX-R gratling gun shrouds Mercedes W211 EvoX-R Mercedes W211 Xenon lensMercedes E-Class W211 Xenon Mini H1Mercedes E-Class W211 Xenon ballastMercedes E-Class W211 Xenon shroud

Source: NDA on Mese.FI


Order the Hella EvoX-R directly in our shop!

This Post Has 23 Comments

  1. Hey Max,

    I really loved the video and decided to do the change myself. The only thing I don’t really understand is the ballast part and the error signal generator…
    I have w211 e320cdi T from 2004 with xenon headlights… Obviously with poor-poor lightning quality what do I do? I know from your video that I should change the projector, perhaps the blubs, but what else? Do the watts match up? Do I need this error blocker or my factory equipment fits my needs?
    Thanks for your answer,

    1. Hi David, you need the EvoX-R projectors, and D2S to AMP adapters, and AMP to D2S adapters. The adapters work as extension cables between the original Hella ignitor and the bulb in the projector. You you can still use all your original xenon equipment. No error blocker or whatever needed 🙂

  2. Where is de link of the video or is there a video i cant find it

    1. We don’t have a video yet for this vehicle, sorry. We’ll upload more and better pictures this week for the W211 here on our blog.

  3. Hello,

    have you more and better picture for the w211?

    Thank you in advance

  4. How much heat in the oven and how long it will heat up.

    1. you can pre heat the oven at 180/200 degrees. Then turn it off, and put in the headlight for about 8/12 minutes :0 It depends on the sealing..

  5. Does EvoX-R 2.0 also fit or only regular EvoX-R?

    1. For the Pré-Facelift the EvoX-R 2.0 would fit! 🙂

  6. I have a 211.208. (facelift bi-xenon). Not cornering lights.

    Will these fit?

    1. No sorry, this will not fit 🙁

  7. What do I Need to retrofit the prefacelift W211 without AFS by EvoxR-2.0??
    Is that just plug and play or is it necesarry to drill new holes and connect with adaptercables?

    1. Hi, i would recommend to use the D2S-D2S adapter cables also 🙂

  8. Hey, i have a w211 facelift, registered 2007/7, so what projektors should i have, if i wanna replace them to new? Link?

    1. This is the FL version, we do not have a solution for it yet. Sorry!

  9. So for the pre-facelift 2004 with stock bi-xenon i should buy EvoX-R 2.0 correct? Are those 100% legal, and will not blind other drivers?

    1. Yes these EvoX-R 2.0 projectors are a perfect replacement. It will certainly not blind your oncoming traffic.. It will be better than original!

  10. Hello

    I already bought “Aharon EvoX-R Bi-xenon projectors Hella design”. And I little doubt, do they fit to my mercedes 211.206 2003register 2.2cdi Bi-xenon with AFS system, lamp type D2S ? Or I do wrong order and I should have ordered EvoX-r 2.0.
    But under this article, there is a link for which are sold EvoX-R.?

    1. Yes these projectors will fit, but you need to make a few adjustments..

  11. Hi,

    What is the difference between EvoX-R and the EvoX-R 2.0 exactly?
    Just an upgrade?

  12. I installed the EvoX-R 2.0 in my W211 pre facelift. My lights have AFS, and I would not recommend this to anyone ! The amount of “modification” is quite extensive. Making holes in the projector is doable, but you have to sand of/Dremel some plastic in the AFS system, the schroud (plastic ring that’s placed around the lens) As the projector is 1 cm shorter than the original, this leaves less room for the AFS system to operate, and another reason for cutting in the AFS system and/or shroud.
    You also have to cut the tabs from the connection to the bulb, or buy the D2S extension cables.
    The more you have to modify, the more chance of touching and scratching the plastic chrome finish inside the headlight, resulting in bad finish. In Addition, the shroud does not fit as secure as on the old projector. Again, Buy the EvoX-R 1.0 and save yourself all this hazzle. This projector would still be a major improvement over the old.
    You will know why, when you open your lights and check the old projectors

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Close Menu